English
Additional to the machined seals Stepseal® 2K and Rimseal for housings ISO 7425/2 (rubber energized plastic seals) the U-Cup RU6 has been developed as an injection molded seal of polyurethane material to fit in the same ISO housings. The integrated NBR O-Ring (only available for series RU62 - RU64) improves the performance at low pressure and low temperature applications. Polyurethane (Zurcon® Z20) is a proven material for U-cups due to their good mechanical properties.
Rod/U-Cup:
Groove Diameter Outside281 mm
Signature StandardRU6402600-Z20
Quality (10th Digit)-
TSS Article Number (3 to 9)6402600
Type of Article0
Root Groove Inside Diameter260 mm
Root Groove Outside Diameter281 mm
Groove Diameter Inside260 mm
Root Groove Width8.1 mm
Article GroupRU
Groove Width8.1 mm
Compound codeZ20
Material Information for the product(s) on this page
Z20
Hardness unit:
Shore A
Gravity Unit:
g/cm³
Material Code Class:
Thermoplastic
Maximum Hardness:
93
Maximum Temperature:
110
Minimum Temperature:
-35
Material Type:
PUR
Material:
Z20
Hardness Tolerance:
+/- 3
Specific Gravity:
1.2
Shore A Hardness:
93+/- 3
Gravity Tolerance:
+/-0.02
Minimum Hardness:
93
Color:
Turquoise