English
Additional to the machined seals Stepseal® 2K and Rimseal for housings ISO 7425/2 (rubber energized plastic seals) the U-Cup RU6 has been developed as an injection molded seal of polyurethane material to fit in the same ISO housings. The integrated NBR O-Ring (only available for series RU62 - RU64) improves the performance at low pressure and low temperature applications. Polyurethane (Zurcon® Z20) is a proven material for U-cups due to their good mechanical properties.
Rod/U-Cup:
Groove Diameter Outside125.5 mm
Signature StandardRU6301100-Z20N
Quality (10th Digit)-
TSS Article Number (3 to 9)6301100
Type of Article0
Root Groove Inside Diameter110 mm
Root Groove Outside Diameter125.5 mm
Groove Diameter Inside110 mm
Root Groove Width6.3 mm
Article GroupRU
Groove Width6.3 mm
Compound codeZ20N
Material Information for the product(s) on this page
N7083
Specific Gravity:
1.24
Shore A Hardness:
70+/- 5
Gravity Unit:
g/cm³
Hardness unit:
Shore A
Material:
N7083
Material Type:
NBR
Color:
Black
Minimum Temperature:
-30
Maximum Temperature:
100
Material Code Class:
Elastomer
Minimum Hardness:
70
Gravity Tolerance:
+/-0.02
Maximum Hardness:
70
Hardness Tolerance:
+/- 5
Z20
Hardness unit:
Shore A
Gravity Unit:
g/cm³
Material Code Class:
Thermoplastic
Maximum Hardness:
93
Maximum Temperature:
110
Minimum Temperature:
-35
Material Type:
PUR
Material:
Z20
Hardness Tolerance:
+/- 3
Specific Gravity:
1.2
Shore A Hardness:
93+/- 3
Gravity Tolerance:
+/-0.02
Minimum Hardness:
93
Color:
Turquoise