English
Additional to the machined seals Stepseal® 2K and Rimseal for housings ISO 7425/2 (rubber energized plastic seals) the U-Cup RU6 has been developed as an injection molded seal of polyurethane material to fit in the same ISO housings. The integrated NBR O-Ring (only available for series RU62 - RU64) improves the performance at low pressure and low temperature applications. Polyurethane (Zurcon® Z20) is a proven material for U-cups due to their good mechanical properties.
Rod/U-Cup:
Groove Diameter Outside74 mm
Signature StandardRU6200630-Z20
Quality (10th Digit)-
TSS Article Number (3 to 9)6200630
Type of Article0
Root Groove Inside Diameter63 mm
Root Groove Outside Diameter74 mm
Groove Diameter Inside63 mm
Root Groove Width4.2 mm
Article GroupRU
Groove Width4.2 mm
Compound codeZ20
Material Information for the product(s) on this page
Z20
Hardness unit:
Shore A
Gravity Unit:
g/cm³
Material Code Class:
Thermoplastic
Maximum Hardness:
93
Maximum Temperature:
110
Minimum Temperature:
-35
Material Type:
PUR
Material:
Z20
Hardness Tolerance:
+/- 3
Specific Gravity:
1.2
Shore A Hardness:
93+/- 3
Gravity Tolerance:
+/-0.02
Minimum Hardness:
93
Color:
Turquoise