English
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. This version is manufactured using Injection Molding. The O-Ring is not included with this item.
Rod/Rimseal/Zurcon®:
Groove Diameter Outside130.1 mm
Signature StandardRRB301150-Z13
Quality (10th Digit)-
TSS Article Number (3 to 9)B301150
Type of Article0
Groove Diameter Inside115 mm
Root Groove Inside Diameter115 mm
Root Groove Outside Diameter130.1 mm
Root Groove Width6.3 mm
Article GroupRR
Groove Width6.3 mm
Compound codeZ13
Material Information for the product(s) on this page
Z13
Z13 Engineering Data Sheet_Ed1_rev0
Minimum Hardness:
62
Material:
Z13
Gravity Unit:
g/cm³
Minimum Temperature:
-30
Hardness Tolerance:
+/- 3
Shore D Hardness:
62+/- 3
Maximum Hardness:
62
Hardness unit:
Shore D
Color:
Dark Grey
Material Code Class:
Thermoplastic
Maximum Temperature:
120
Gravity Tolerance:
+/-0.02
Material Type:
PUR
Specific Gravity:
1.24