English
Glyd Ring® RG23 is produced with an interference fit which together with the squeeze of the O-Ring ensures sealing effect even at low pressures. At higher system pressures, the O-Ring is energized by the fluid, pushing Glyd Ring® against the sealing face with increased force. Besides good static sealing the wide, shallow chamfers provide generous lubrication of the dynamic contact area in reciprocating applications. Available in Turcon® or Zurcon® materials. The O-Ring is not included with this item.
Rod/GlydRing®/Turcon®:
Groove Diameter Outside250.5 mm
Ring Width7.6 mm
Signature StandardRGB402300-M12
Quality (10th Digit)-
TSS Article Number (3 to 9)B402300
Type of Article0
Groove Diameter Inside230 mm
Root Ring Inside Diameter228.2 mm
Root Groove Inside Diameter230 mm
Root Groove Outside Diameter250.5 mm
Root Groove Thickness10.25 mm
Root Groove Width8.1 mm
Article GroupRG
Root Ring Length0 mm
Legacy ID from KOM2RGB402300-M12
Root Ring Outside Diameter237.7 mm
Root Ring Thickness4.75 mm
Ring Thickness4.75 mm
Groove Thickness10.25 mm
Groove Width8.1 mm
Ring Length0 mm
Root Ring Width7.6 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance Max50 mm
Seal Tube ID Tolerance Min-50 mm
Seal Tube OD Tolerance From240.7 mm
Seal Tube ID Tolerance Max-3 mm
Seal Tube OD Tolerance Min3 mm
Ring Diameter Outside237.7 mm
Seal Tube OD Tolerance To287.7 mm
Seal Tube ID Tolerance To225.2 mm
Seal Tube ID Tolerance From178.2 mm
Ring Diameter Inside228.2 mm
Class Dependencies200000041763
Material Number200000041763
Compound Type110
Compound codeM12
Material Information for the product(s) on this page
M12
Gravity Unit:
g/cm³
Specific Gravity:
2.31
Color:
Dark Grey
Maximum Temperature:
260
Minimum Temperature:
-200
Ball Hardness:
34
Material Type:
PTFE
Material:
M12
Gravity Tolerance:
+/-0.03
Material Code Class:
Thermoplastic