English
Variseal® W2 is a single-acting PTFE piston seal energized by a Slantcoil® spring. The advantage of the Variseal® W2 lies in its low friction and relatively constant preloading force over a relatively large deformation range. The seal is used wherever friction has to be kept within a narrow tolerance zone, for instance in pressure switches. Available in Turcon® or Zurcon® materials.
Piston/Variseal®:
Groove Diameter Outside22 mm
Signature StandardPVJ100220-T40E
TSS Article Number (3 to 9)J100220
Quality (10th Digit)-
Type of Article0
Root Groove Inside Diameter17.5 mm
Root Groove Outside Diameter22 mm
Root Groove Width3.6 mm
Article GroupPV
Groove Diameter Inside17.5 mm
Groove Width3.6 mm
Compound codeT40E
Material Information for the product(s) on this page
T40
Maximum Hardness:
76
Material:
T40
Minimum Hardness:
76
Ball Hardness:
27
Minimum Temperature:
-200
Hardness unit:
Shore A
Material Type:
PTFE
Gravity Unit:
g/cm³
Maximum Temperature:
260
Specific Gravity:
2.07
Material Code Class:
Thermoplastic
Color:
Grey
Hardness Tolerance:
+/- 10
Shore A Hardness:
76+/- 10
Gravity Tolerance:
+/-0.03