English
V-Ring type A is the most common and available for shaft diameters from 3 to 1000 mm. It is an all-rubber seal for rotary shafts, rotating with the shaft and sealing axially against the stationary counterface. Its light lip pressure generates low friction. It can also be used as a secondary seal to protect primary seals that do not perform well in hostile environments.
Rotary/V-Ring:
Ring Width5.5 mm
Ring Diameter Outside20 mm
Ring Diameter Inside9 mm
Signature StandardTWVA00100-N6T50
Quality (10th Digit)-
TSS Article Number (3 to 9)VA00100
Type of Article0
Root Ring Inside Diameter9 mm
Article GroupTW
Root Ring Outside Diameter20 mm
Root Ring Thickness3 mm
Root Ring Width5.5 mm
Ring Thickness3 mm
Compound codeN6T50
Material Information for the product(s) on this page
N6T50
Hardness:
60 (Shore A)
Basic Material:
NBR
Colour:
Black
Commercial Description:
The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C (for a short period of time up to +120 °C). NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.
