English
A double-acting O-Ring energized seal designed for rotating, oscillating and helically moving pistons, rods and shafts. It is installed in grooves to ISO 7425 and is available in a single-acting version for higher rotating speeds.
Installation Dimensions:
Rod Diameter, dN f8/h928 mm
Groove Diameter, D1 H935.5 mm
Groove Width, L1 +0,23.2 mm
Material Properties:
Material TypeUHMW PE/FKM
O-Ring:
O-Ring Size31.42 x 2.62 mm
O-Ring TSS Part No.ORAR00124
Quality & Norms:
Conform recommendation of ISO 3320yes
Material Information for the product(s) on this page
V7
Colour:
Green
Basic Material:
FKM
Commercial Description:
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V