RU0100300-Z20

U-Cups are used primarily as seals for piston rods in hydraulic cylinders. U-Cups in polyurethane are proven elements, due to their good mechanical properties, for standard cylinder construction, particularly for mobile hydraulics under rough operating conditions.

Rod/U-Cup:

Groove Diameter Outside38 mm

Signature StandardRU0100300-Z20

Quality (10th Digit)-

TSS Article Number (3 to 9)100300

Type of Article0

Root Groove Inside Diameter30 mm

Root Groove Outside Diameter38 mm

Root Groove Thickness6.3 mm

Groove Diameter Inside30 mm

Article GroupRU

Groove Thickness0 mm

Groove Width6.3 mm

Compound codeZ20

Installation Guide (PDF)

Material Information for the product(s) on this page

Z20

Material data sheet

Hardness:

93 (Shore A)

Commercial Description:

Zurcon® Z20, 93ShA proprietary Thermoplastic Polyurethane material based on aromatic diisocyanate and polyester diol. Developed by Trelleborg Sealing Solutions for hydraulic application sealing elements, Zurcon® Z20 offers high wear and extrusion resistance, low compression set, a wide operating temperature range, minimal swelling in mineral oil and acceptable hydrolysis resistance.