English
This single-acting Trelleborg O-Ring energized rod seal is made of Turcon® and provides high static and dynamic sealing results. Can be installed together with other seals in a tandem configuration for advanced static and dynamic tightness. The Trelleborg Turcon® Stepseal® 2K offers high extrusion resistance, low friction with no stick-slip, minimal break out force and high wear resistance.
Installation Dimensions:
Rod Diameter, dN f8/h95 mm
Groove Diameter, D1 H99.9 mm
Groove Width, L1 +0.22.2 mm
Material Properties:
Material TypePTFE/FKM
Seal Capabilities:
Min. Temperature-10 °C
Max. Temperature200 °C
Speed max.15 m/s
Pressure max.50 MPa
O-Ring:
O-Ring Size6.70 x 1.80 mm
O-Ring TSS Article No.ORIA00670
Material Information for the product(s) on this page
V7
Colour:
Green
Basic Material:
FKM
Commercial Description:
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V
M12
Colour:
Dark Grey
Basic Material:
PTFE
Filler:
Virgin PTFE compounded with Turcon®, mineral fibre and additives
Commercial Description:
Turcon® M12 is a modern compound and the new standard industrial material. A development of thorough benchmarking and performance testing, Turcon® M12 offers low friction, high wear resistance and costs on par with standard bronze-filled compounds. This material is designed to be the first choice for seals used with linear motion, replacing standard (medium-filled) industrial bronze-filled compounds. Used in article numbers ending in M12N and M12V.