English
The double acting Trelleborg Turcon® Glyd Ring® is a combination of a Turcon® based slipper seal and an energising O-Ring. It is produced with an interference fit which together with the squeeze of the O-Ring ensures a good sealing effect even at low pressure. At higher system pressures, the O-Ring is energised by the fluid, pushing the Turcon® Glyd Ring® against the sealing face with increased force.
Installation Dimensions:
Rod Diameter, dN f8/h922 mm
Groove Diameter, D1 H932.7 mm
Groove Width, L1 +0,24.2 mm
Material Properties:
Material TypePTFE/FKM
Seal Capabilities:
Min. Temperature-10 °C
Max. Temperature200 °C
Speed max.15 m/s
Pressure max.50 MPa
O-Ring:
O-Ring Size26.58 x 3.53 mm
O-Ring TSS Article No.ORAR00215
Quality & Norms:
Correspond to recommendation of ISO 3320yes
Material Information for the product(s) on this page
V7
Colour:
Green
Basic Material:
FKM
Commercial Description:
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V
M12
Colour:
Dark Grey
Basic Material:
PTFE
Filler:
Virgin PTFE compounded with Turcon®, mineral fibre and additives
Commercial Description:
Turcon® M12 is a modern compound and the new standard industrial material. A development of thorough benchmarking and performance testing, Turcon® M12 offers low friction, high wear resistance and costs on par with standard bronze-filled compounds. This material is designed to be the first choice for seals used with linear motion, replacing standard (medium-filled) industrial bronze-filled compounds. Used in article numbers ending in M12N and M12V.