OR6A00190-E7518

Trelleborg O-Rings are the most widely used seals because they are efficient and economical and can be used in a wide variety of static and dynamic applications. O-Rings can be used to seal practically all liquid and gaseous media and they are available in elastomeric and other materials including EPDM, FKM and NBR, among others.

Material Properties:

Maximum Operating Temperature150 °C

Minimum Operating Temperature-45 °C

Hardness Nominal70

Hardness Tolerance+/- 5

Hardness UnitShore A

ColorBlack

Material TypeEPDM

Tensile Strength10 MPa

Elongation at break125 %

Seal dimensions:

Inside diameter d₁1.9 mm

Inside diameter tolerance ±0.13 mm

Inside diameter d₁ inch0.075 in

Cross section d₂2.55 mm

Cross section tolerance ±0.09 mm

Cross section d₂ inch0.1 in

Institute Approvals:

3A Sanitaryyes

NSF 51yes

ACSyes

BAMyes

DIN EN 681-1yes

FDA 1yes

KTWyes

NSF 61yes

USP 26 Chapter 87yes

USP 26 Chapter 88yes

W 270yes

W 534yes

WRASyes

REG EC 1935/2004yes

Animal Free (ADI)yes

Instruction (PDF) 1

Material Information for the product(s) on this page

E7

Material data sheet

Colour:

Black

Basic Material:

EPDM

Commercial Description:

A 70 durometer EPDM. EPDM shows good heat, ozone, and ageing resistance. In addition it also exhibits high levels of elasticity, good low temperature behaviour, as well as good insulating properties. The operating temperatures of applications for EPDM range between -45°C and +130°C. EPDM can often be found in applications with brake fluids (based on glycol) and hot water.