GP4100120-T47

Trelleborg Turcite® Slydring® prevents metal-to-metal contact between piston/rod and bore/gland, absorbing transverse loads. Suitable for most hydraulic fluids, Turcite® material demonstrates good load capacity with low friction and stick-slip-free operation. ‘Teardrop’ structure on some of Turcite® sizes improves lubrication and protects against damage by dirt particles by embedding them. Higher static loads are permissible.

Installation Dimensions:

Bore Diameter D_N H912 mm

Groove Diameter d₂ h88.9 mm

Groove Width L₂ +0,22.5 mm

Thickness W1.55 mm

Material Properties:

Maximum Operating Temperature260 °C

Minimum Operating Temperature-200 °C

Hardness Nominal63

Hardness Tolerance+/- 5

Hardness UnitShore D

Material TypePTFE

Tensile Strength18 MPa

Elongation at break150 %

Turcite® and Zurcon® Slydring® for Piston

Instruction (PDF) 1

Material Information for the product(s) on this page

T47

Material data sheet

Colour:

Greyish to Dark Brown

Basic Material:

PTFE

Filler:

Composition of PTFE compounded with Turcon® and bronze

Commercial Description:

Bronze-filled PTFE compounds are the industry standard in hydraulic applications. Turcon® T47 is a blend of PTFE, bronze, and a proprietary Turcon® filler and is backed by years of time-tested performance and offers a balance of performance and cost. This material has very good wear properties and low friction. For medium to heavy applications with reciprocating movements in mineral oils and other media with good lubrication.