English
Trelleborg Kantseal is an elastomer square sectioned ring for static applications.Mostly used on flanges to SAE standards and covers, it has a high sealing efficiency and keeps ist shape. Available in nitrile (NBR) and fluorocarbon (FKM).
Installation Dimensions:
Groove Dimension, D1 H1112.7 mm
Groove Dimension, H +0,22.4 mm
Groove Dimension, L -0,051.45 mm
Radius, r1 max.0.4 mm
Ring dimensions, ID9.25 mm
Ring dimensions, W1.68 mm
Ring dimensions, T1.68 mm
Material Properties:
Maximum Operating Temperature100 °C
Minimum Operating Temperature-30 °C
Hardness Nominal70
Hardness Tolerance+/- 5
Hardness UnitShore A
ColorBlack
Specific Gravity1.2400 g/cm³
Gravity Tolerance+/-0.02 g/cm³
Material TypeNBR
Modulus 100%4.7 MPa
Tensile Strength15.9 MPa
Elongation at break329 %
Compression Set9 %
Compression Set Test Conditions24h/100°C
TR Point-23 °C
TR 10 Point-21 °C
Seal Capabilities:
Min. Temperature-30 °C
Max. Temperature100 °C
Pressure max., static use50 MPa
Material Information for the product(s) on this page
N7028
Colour:
Black
Basic Material:
NBR
Hardness:
70 (Shore A)
Commercial Description:
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.