DKAR00009-V90G1

Trelleborg Kantseal is an elastomer square sectioned ring for static applications.Mostly used on flanges to SAE standards and covers, it has a high sealing efficiency and keeps ist shape. Available in nitrile (NBR) and fluorocarbon (FKM).

Installation Dimensions:

Groove Dimension, D1 H118.71 mm

Groove Dimension, H +0,22.4 mm

Groove Dimension, L -0,051.45 mm

Radius, r₁ max.0.4 mm

Ring dimensions, ID5.28 mm

Ring dimensions, W1.68 mm

Ring dimensions, T1.68 mm

Material Properties:

Maximum Operating Temperature200 °C

Minimum Operating Temperature-15 °C

Hardness Nominal90

Hardness Tolerance+/- 5

Hardness UnitShore A

ColorGreen

Specific Gravity2.4000 g/cm³

Gravity Tolerance+/-0.03 g/cm³

Material TypeFKM

Modulus 100%12.4 MPa

Tensile Strength10 MPa

Elongation at break100 %

Compression Set20 %

Compression Set Test Conditions24h/175°C

TR Point-14 °C

TR 10 Point-12 °C

Product info:

Preferred TSS material combinationyes

Institute Approvals:

BAMyes

Instruction (PDF) 1

Material Information for the product(s) on this page

V9

Colour:

Green

Basic Material:

FKM

Commercial Description:

An 90 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.