English
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.
Piston/Rimseal/Zurcon®:
Groove Diameter Outside28 mm
Ring Width3 mm
Signature StandardPR1600280-Z54
TSS Article Number (3 to 9)1600280
Quality (10th Digit)-
Type of Article0
Root Ring Inside Diameter24.8 mm
Root Groove Inside Diameter20.7 mm
Root Groove Outside Diameter28 mm
Root Groove Thickness3.65 mm
Root Groove Width3.2 mm
Article GroupPR
Groove Diameter Inside20.7 mm
Legacy ID from KOM2PR1600280-Z54
Root Ring Outside Diameter27.9 mm
Root Ring Thickness1.55 mm
Root Ring Width3 mm
Ring Thickness1.55 mm
Groove Thickness3.65 mm
Groove Width3.2 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance Max16 mm
Seal Tube ID Tolerance Min-16 mm
Seal Tube OD Tolerance From29.2 mm
Seal Tube ID Tolerance Max-1.3 mm
Seal Tube OD Tolerance Min1.3 mm
Ring Diameter Outside27.9 mm
Seal Tube OD Tolerance To43.9 mm
Seal Tube ID Tolerance To23.5 mm
Seal Tube ID Tolerance From8.8 mm
Ring Diameter Inside24.8 mm
Class Dependencies200000054554
Material Number200000054554
Compound Type110
Compound codeZ54
Material Information for the product(s) on this page
Z54
Zurcon Z54 material specificationZ54 Engineering Data
Color:
Turquoise
Specific Gravity:
1.16
Gravity Unit:
g/cm³
Material:
Z54
Minimum Temperature:
-45
Hardness Tolerance:
+/- 5
Minimum Hardness:
58
Gravity Tolerance:
+/-0.01
Material Type:
PUR
Material Code Class:
Thermoplastic
Maximum Hardness:
58
Shore D Hardness:
58+/- 5
Maximum Temperature:
110
Hardness unit:
Shore D