English
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.
Piston/Rimseal/Zurcon®:
Groove Diameter Outside180 mm
Ring Width6 mm
Signature StandardPR1401800-Z53
TSS Article Number (3 to 9)1401800
Quality (10th Digit)-
Type of Article0
Root Ring Inside Diameter173.3 mm
Root Groove Inside Diameter164.9 mm
Root Groove Outside Diameter180 mm
Root Groove Thickness7.55 mm
Root Groove Width6.3 mm
Article GroupPR
Groove Diameter Inside164.9 mm
Legacy ID from KOM2PR1401800-Z53
Root Ring Outside Diameter179.9 mm
Root Ring Thickness3.3 mm
Root Ring Width6 mm
Ring Thickness3.3 mm
Groove Thickness7.55 mm
Groove Width6.3 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance Max50 mm
Seal Tube ID Tolerance Min-50 mm
Seal Tube OD Tolerance From182.9 mm
Seal Tube ID Tolerance Max-3 mm
Seal Tube OD Tolerance Min3 mm
Ring Diameter Outside179.9 mm
Seal Tube OD Tolerance To229.9 mm
Seal Tube ID Tolerance To170.3 mm
Seal Tube ID Tolerance From123.3 mm
Ring Diameter Inside173.3 mm
Class Dependencies200000041088
Material Number200000041088
Compound Type110
Compound codeZ53
Material Information for the product(s) on this page
Z53
Color:
Yellow to Light-Brown
Maximum Hardness:
70
Material Type:
PUR
Hardness unit:
Shore D
Gravity Tolerance:
+/-0.02
Maximum Temperature:
110
Specific Gravity:
1.18
Material:
Z53
Material Code Class:
Thermoplastic
Gravity Unit:
g/cm³
Minimum Hardness:
70
Hardness Tolerance:
+/- 6
Minimum Temperature:
-45
Shore D Hardness:
70+/- 6