English
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.
Piston/Rimseal/Zurcon®:
Groove Diameter Outside160 mm
Ring Width6 mm
Signature StandardPR1401600-Z54
TSS Article Number (3 to 9)1401600
Quality (10th Digit)-
Type of Article0
Root Ring Inside Diameter153.3 mm
Root Groove Inside Diameter144.9 mm
Root Groove Outside Diameter160 mm
Root Groove Thickness7.55 mm
Root Groove Width6.3 mm
Article GroupPR
Groove Diameter Inside144.9 mm
Legacy ID from KOM2PR1401600-Z54
Root Ring Outside Diameter159.9 mm
Root Ring Thickness3.3 mm
Root Ring Width6 mm
Ring Thickness3.3 mm
Groove Thickness7.55 mm
Groove Width6.3 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance Max50 mm
Seal Tube ID Tolerance Min-50 mm
Seal Tube OD Tolerance From162.9 mm
Seal Tube ID Tolerance Max-3 mm
Seal Tube OD Tolerance Min3 mm
Ring Diameter Outside159.9 mm
Seal Tube OD Tolerance To209.9 mm
Seal Tube ID Tolerance To150.3 mm
Seal Tube ID Tolerance From103.3 mm
Ring Diameter Inside153.3 mm
Class Dependencies200000064059
Material Number200000064059
Compound Type110
Compound codeZ54
Material Information for the product(s) on this page
Z54
Zurcon Z54 material specificationZ54 Engineering Data
Color:
Turquoise
Specific Gravity:
1.16
Gravity Unit:
g/cm³
Material:
Z54
Minimum Temperature:
-45
Hardness Tolerance:
+/- 5
Minimum Hardness:
58
Gravity Tolerance:
+/-0.01
Material Type:
PUR
Material Code Class:
Thermoplastic
Maximum Hardness:
58
Shore D Hardness:
58+/- 5
Maximum Temperature:
110
Hardness unit:
Shore D