English
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.
Piston/Rimseal/Zurcon®:
Groove Diameter Outside105 mm
Ring Width6 mm
Signature StandardPR1401050-Z54
TSS Article Number (3 to 9)1401050
Quality (10th Digit)-
Type of Article0
Root Ring Inside Diameter98.3 mm
Root Groove Inside Diameter89.9 mm
Root Groove Outside Diameter105 mm
Root Groove Thickness7.55 mm
Root Groove Width6.3 mm
Article GroupPR
Groove Diameter Inside89.9 mm
Legacy ID from KOM2PR1401050-Z54
Root Ring Outside Diameter104.9 mm
Root Ring Thickness3.3 mm
Root Ring Width6 mm
Ring Thickness3.3 mm
Groove Thickness7.55 mm
Groove Width6.3 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance Max50 mm
Seal Tube ID Tolerance Min-50 mm
Seal Tube OD Tolerance From106.9 mm
Seal Tube ID Tolerance Max-2 mm
Seal Tube OD Tolerance Min2 mm
Ring Diameter Outside104.9 mm
Seal Tube OD Tolerance To154.9 mm
Seal Tube ID Tolerance To96.3 mm
Seal Tube ID Tolerance From48.3 mm
Ring Diameter Inside98.3 mm
Class Dependencies200000064057
Material Number200000064057
Compound Type110
Compound codeZ54
Material Information for the product(s) on this page
Z54
Zurcon Z54 material specificationZ54 Engineering Data
Color:
Turquoise
Specific Gravity:
1.16
Gravity Unit:
g/cm³
Material:
Z54
Minimum Temperature:
-45
Hardness Tolerance:
+/- 5
Minimum Hardness:
58
Gravity Tolerance:
+/-0.01
Material Type:
PUR
Material Code Class:
Thermoplastic
Maximum Hardness:
58
Shore D Hardness:
58+/- 5
Maximum Temperature:
110
Hardness unit:
Shore D