English
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.
Piston/Rimseal/Zurcon®:
Groove Diameter Outside55 mm
Ring Width4 mm
Signature StandardPR1400550-Z54
TSS Article Number (3 to 9)1400550
Quality (10th Digit)-
Type of Article0
Root Ring Inside Diameter49.9 mm
Root Groove Inside Diameter44.3 mm
Root Groove Outside Diameter55 mm
Root Groove Thickness5.35 mm
Root Groove Width4.2 mm
Article GroupPR
Groove Diameter Inside44.3 mm
Legacy ID from KOM2PR1400550-Z54
Root Ring Outside Diameter54.9 mm
Root Ring Thickness2.5 mm
Root Ring Width4 mm
Ring Thickness2.5 mm
Groove Thickness5.35 mm
Groove Width4.2 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance Max16 mm
Seal Tube ID Tolerance Min-16 mm
Seal Tube OD Tolerance From56.2 mm
Seal Tube ID Tolerance Max-1.3 mm
Seal Tube OD Tolerance Min1.3 mm
Ring Diameter Outside54.9 mm
Seal Tube OD Tolerance To70.9 mm
Seal Tube ID Tolerance To48.6 mm
Seal Tube ID Tolerance From33.9 mm
Ring Diameter Inside49.9 mm
Class Dependencies200000041083
Material Number200000041083
Compound Type110
Compound codeZ54
Material Information for the product(s) on this page
Z54
Zurcon Z54 material specificationZ54 Engineering Data
Color:
Turquoise
Specific Gravity:
1.16
Gravity Unit:
g/cm³
Material:
Z54
Minimum Temperature:
-45
Hardness Tolerance:
+/- 5
Minimum Hardness:
58
Gravity Tolerance:
+/-0.01
Material Type:
PUR
Material Code Class:
Thermoplastic
Maximum Hardness:
58
Shore D Hardness:
58+/- 5
Maximum Temperature:
110
Hardness unit:
Shore D