English
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.
Piston/Rimseal/Zurcon®:
Groove Diameter Outside50 mm
Ring Width4 mm
Signature StandardPR1400500-Z53
TSS Article Number (3 to 9)1400500
Quality (10th Digit)-
Type of Article0
Root Ring Inside Diameter44.9 mm
Root Groove Inside Diameter39.3 mm
Root Groove Outside Diameter50 mm
Root Groove Thickness5.35 mm
Root Groove Width4.2 mm
Article GroupPR
Groove Diameter Inside39.3 mm
Legacy ID from KOM2PR1400500-Z53
Root Ring Outside Diameter49.9 mm
Root Ring Thickness2.5 mm
Root Ring Width4 mm
Ring Thickness2.5 mm
Groove Thickness5.35 mm
Groove Width4.2 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance Max16 mm
Seal Tube ID Tolerance Min-16 mm
Seal Tube OD Tolerance From51.2 mm
Seal Tube ID Tolerance Max-1.3 mm
Seal Tube OD Tolerance Min1.3 mm
Ring Diameter Outside49.9 mm
Seal Tube OD Tolerance To65.9 mm
Seal Tube ID Tolerance To43.6 mm
Seal Tube ID Tolerance From28.9 mm
Ring Diameter Inside44.9 mm
Class Dependencies200000041082
Material Number200000041082
Compound Type110
Compound codeZ53
Material Information for the product(s) on this page
Z53
Color:
Yellow to Light-Brown
Maximum Hardness:
70
Material Type:
PUR
Hardness unit:
Shore D
Gravity Tolerance:
+/-0.02
Maximum Temperature:
110
Specific Gravity:
1.18
Material:
Z53
Material Code Class:
Thermoplastic
Gravity Unit:
g/cm³
Minimum Hardness:
70
Hardness Tolerance:
+/- 6
Minimum Temperature:
-45
Shore D Hardness:
70+/- 6