English
FEP Encapsulated O-Rings combine the resilience and sealing force of an elastomer with the chemical resistance of PTFE. They consist of an elastomeric core of silicone or FKM with a seamless, thin encapsulation of FEP. The required elasticity, pretension and dimensional stability is provided by the elastomer core, while the seamless FEP encapsulation ensures reliable sealing and high resistance to aggressive media. FEP Encapsulated O-Rings are primarily used in low pressure static or slow moving dynamic applications. This seal type is recommended for non-abrasive contact surfaces and non-abrasive media only. Preconditions for the use of FEP Encapsulated O-Rings are low press-in assembly forces and limited O-Ring elongation.
O-Ring/FEP/PFA enapsulat:
Ring Width2.62 mm
Ring Diameter Inside66.34 mm
Signature StandardOFAR00146-SZ00G
TSS Article Number (3 to 9)AR00146
QCC for O-rings-
Type of Article0
Root Ring Inside Diameter66.34 mm
Article GroupOF
Root Ring Width2.62 mm
Compound codeSZ00G
Material Information for the product(s) on this page
SZ00G
Specific Gravity:
1.22
Shore A Hardness:
75+/- 5
Gravity Unit:
g/cm³
Minimum Hardness:
75
Material Code Class:
Material Combination
Hardness Tolerance:
+/- 5
Maximum Hardness:
75
Material:
SZ00G
Material Type:
FEP/VMQ
Hardness unit:
Shore A
Maximum Temperature:
175
Gravity Tolerance:
+/-0.03
Minimum Temperature:
-50
Color:
Red