English
Turcite® Slydring® prevents metal-to-metal contact between piston / rod and bore / gland, absorbing transverse loads. Turcite® material gives good load capacity with low friction and stick-slip-free operation. The Slydring® protects critical sealing lips from contamination and dieseling effects. Cost-effective, it allows designers freedom in hardware material selection. Higher static loads are permissible.
Guide/Slydring®/Rod mm:
Groove Diameter Outside0 mm
Ring Width5.5 mm
Ring Diameter Outside0 mm
Ring Diameter Inside0 mm
TSS Article Number (3 to 9)6500350
Signature StandardGR6500350-T51
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter35 mm
Root Groove Outside Diameter35 mm
Root Ring Inside Diameter0 mm
Root Groove Thickness2.5 mm
Root Groove Width5.6 mm
Article GroupGR
Groove Diameter Inside35 mm
Legacy ID from KOM2GR6500350-T51
Root Ring Length115.8 mm
Root Ring Outside Diameter0 mm
Root Ring Thickness2.5 mm
Root Ring Width5.5 mm
Ring Thickness2.5 mm
Groove Length0 mm
Groove Thickness5.6 mm
Groove Width2.5 mm
Ring Length115.8 mm
Compound codeT51
Material Information for the product(s) on this page
T51
Turcite T51 engineering dataTurcite T51 material specification
Minimum Temperature:
-200
Gravity Unit:
g/cm³
Ball Hardness:
34
Material Type:
PTFE
Maximum Temperature:
260
Gravity Tolerance:
+0.03/-0.02
Material:
T51
Material Code Class:
Thermoplastic
Specific Gravity:
2.07
Color:
Black