English
Turcite® Slydring® prevents metal-to-metal contact between piston / rod and bore / gland, absorbing transverse loads. Turcite® material gives good load capacity with low friction and stick‑slip-free operation. The Slydring® protects critical sealing lips from contamination and dieseling effects. Cost-effective, it allows designers freedom in hardware material selection. Higher static loads are permissible. This is a Custom Article Number with a Customer Specific Design.
Guide/Slydring®Piston mm:
Groove Diameter Outside150 mm
Ring Width9.5 mm
Ring Diameter Outside150 mm
Ring Diameter Inside0 mm
Location MarkZS
Signature StandardGPZS991500T54
Type of Article1
Article Code with 6 char991500
Root Groove Inside Diameter0 mm
Root Groove Outside Diameter150 mm
Root Ring Inside Diameter0 mm
Root Groove Thickness4 mm
Root Groove Length445 mm
Root Groove Width9.5 mm
Article GroupGP
Groove Diameter Inside0 mm
Legacy ID from KOM2GPZS991500T54
Root Ring Length445 mm
Root Ring Outside Diameter150 mm
Root Ring Thickness4 mm
Root Ring Width9.5 mm
Ring Thickness4 mm
Groove Length445 mm
Groove Thickness4 mm
Groove Width9.5 mm
Ring Length445 mm
Compound codeT54
Material Information for the product(s) on this page
T54
Gravity Unit:
g/cm³
Material Code Class:
Thermoplastic
Specific Gravity:
2.27
Minimum Temperature:
-200
Maximum Temperature:
260
Color:
Grey to Blue
Gravity Tolerance:
+0.04/-0.03
Ball Hardness:
35
Material:
T54
Material Type:
PTFE