English
Turcite® Slydring® prevents metal-to-metal contact between piston / rod and bore / gland, absorbing transverse loads. Turcite® material gives good load capacity with low friction and stick‑slip-free operation. The Slydring® protects critical sealing lips from contamination and dieseling effects. Cost-effective, it allows designers freedom in hardware material selection. Higher static loads are permissible. This is a Custom Article Number with a Customer Specific Design.
Guide/Slydring®Piston mm:
Groove Diameter Outside90 mm
Ring Width9.5 mm
Ring Diameter Outside90 mm
Ring Diameter Inside0 mm
Location MarkZS
Signature StandardGPZS990900T54
Type of Article1
Article Code with 6 char990900
Root Groove Inside Diameter0 mm
Root Groove Outside Diameter90 mm
Root Ring Inside Diameter0 mm
Root Groove Thickness9.5 mm
Root Groove Length262 mm
Root Groove Width4 mm
Article GroupGP
Groove Diameter Inside0 mm
Legacy ID from KOM2GPZS990900T54
Root Ring Length262 mm
Root Ring Outside Diameter90 mm
Root Ring Thickness4 mm
Root Ring Width9.5 mm
Ring Thickness4 mm
Groove Length262 mm
Groove Thickness9.5 mm
Groove Width4 mm
Ring Length262 mm
Compound codeT54
Material Information for the product(s) on this page
T54
Gravity Unit:
g/cm³
Material Code Class:
Thermoplastic
Specific Gravity:
2.27
Minimum Temperature:
-200
Maximum Temperature:
260
Color:
Grey to Blue
Gravity Tolerance:
+0.04/-0.03
Ball Hardness:
35
Material:
T54
Material Type:
PTFE