Turcite® -B Slydway® is a low friction linear bearing strip C for use primarily on the ways and gibs of machine tools. It provides low friction, stick-slip-free operation, long life and minimum wear. It is installed using a two-part epoxy resin after cleaning and degreasing the bare metal surface thoroughly. The seal is dimensionally stable, maintenance-free and can be operated with or without lubrication.
Guide/Slydway®B/Turcite®:
TSS Article Number (3 to 9)B500030
Signature StandardGLB500030-TB
Type of Article0
Quality (10th Digit)-
Root Groove Thickness30 mm
Root Groove Width1.5 mm
Article GroupGL
Groove Thickness30 mm
Groove Width1.5 mm
Compound codeTB
Material Information for the product(s) on this page
TB
Turcite TB material specificationTurcite B Engineering Data
Gravity Unit:
g/cm³
Specific Gravity:
3.03
Hardness unit:
Shore D
Maximum Temperature:
260
Maximum Hardness:
55
Minimum Temperature:
-200
Hardness Tolerance:
+/- 5
Shore D Hardness:
55+/- 5
Minimum Hardness:
55
Gravity Tolerance:
+/-0.07
Material:
TB
Material Code Class:
Thermoplastic
Material Type:
PTFE