English
Type BP Back-up Rings have a rectangular cross section and are made from PTFE materials. The cut angle is either 30˚ or 45˚. It consists of standard two spiral windings which are cut at the ends at an angle. It can be used in static or dynamic applications with reciprocating movements possible. Preferred for installations in closed grooves where uncut Back-up Rings are not suitable. It can compensate large temperature changes and tolerances through a screw-like elongation and contraction.
BU Rectangular spiral:
Ring Width3.2 mm
Ring Diameter Inside25.6 mm
TSS Article Number (3 to 9)32D0256
Signature StandardBP32D0256-PT008
Type of Article0
Quality (10th Digit)-
Root Ring Inside Diameter25.6 mm
Article GroupBP
Root Ring Thickness0.7 mm
Root Ring Width3.2 mm
Ring Thickness0.7 mm
Compound codePT008
Material Information for the product(s) on this page
PT008
Gravity Tolerance:
+/-0.04
Material Code Class:
Thermoplastic
Minimum Hardness:
55
Color:
White
Specific Gravity:
2.16
Minimum Temperature:
-200
Material:
PT008
Gravity Unit:
g/cm³
Maximum Temperature:
260
Maximum Hardness:
55
Hardness unit:
Shore D
Hardness Tolerance:
+/- 5
Shore D Hardness:
55+/- 5
Material Type:
PTFE