English
Type BP Back-up Rings have a rectangular cross section and are made from PTFE materials. The cut angle is either 30˚ or 45˚. It consists of standard two spiral windings which are cut at the ends at an angle. It can be used in static or dynamic applications with reciprocating movements possible. Preferred for installations in closed grooves where uncut Back-up Rings are not suitable. It can compensate large temperature changes and tolerances through a screw-like elongation and contraction.
BU Rectangular spiral:
Ring Width2.3 mm
Ring Diameter Outside16.6 mm
Ring Diameter Inside12 mm
TSS Article Number (3 to 9)2300120
Signature StandardBP2300120-PT008
Type of Article0
Quality (10th Digit)-
Root Ring Inside Diameter12 mm
Article GroupBP
Root Ring Outside Diameter16.6 mm
Root Ring Thickness0.7 mm
Root Ring Width2.3 mm
Ring Thickness0.7 mm
Compound codePT008
Material Information for the product(s) on this page
PT008
Gravity Tolerance:
+/-0.04
Material Code Class:
Thermoplastic
Minimum Hardness:
55
Color:
White
Specific Gravity:
2.16
Minimum Temperature:
-200
Material:
PT008
Gravity Unit:
g/cm³
Maximum Temperature:
260
Maximum Hardness:
55
Hardness unit:
Shore D
Hardness Tolerance:
+/- 5
Shore D Hardness:
55+/- 5
Material Type:
PTFE