English
Wiper specially designed for guide units with linear ball bearings. Wiper lip with minimal pre-load to avoid negative influences on the sliding behavior of the guide unit. The outer diameter is designed for fixing by a standard circlip retainer groove. The installation dimensions correspond to the housing diameter of the ball bearing.
Pneumatic -Rod Seal:
Groove Diameter Outside52 mm
TSS Article Number (3 to 9)BB00400
Signature StandardAWBB00400TWU9E1
Type of Article0
Quality (10th Digit)T
Root Groove Inside Diameter40 mm
Root Groove Outside Diameter52 mm
Root Groove Width3 mm
Article GroupAW
Groove Diameter Inside40 mm
Groove Width3 mm
Compound codeWU9E1
Material Information for the product(s) on this page
WU9E1
WU9E1 Engineering Data Sheet_Ed1_rev0
Color:
Grey
Gravity Unit:
g/cm³
Maximum Temperature:
80
Material Code Class:
Thermoplastic
Specific Gravity:
1.14
Hardness Tolerance:
+/- 2
Minimum Temperature:
-40
Gravity Tolerance:
+/-0.02
Maximum Hardness:
91
Material:
WU9E1
Shore A Hardness:
91+/- 2
Hardness unit:
Shore A
Minimum Hardness:
91
Material Type:
PUR